HOME / PRODUCTS / LINEAR SCONCES / MINILUX HRL UP&DOWN LS13

LINEAR SCONCES

LS13

Minilux HRL Up & Down

CABINETRY OR WALL MOUNTED LINEAR SCONCE UP & DOWN LIGHT

  • Linear Sconce Up & Down Light: most of the light goes Up—and a portion of the light also goes Down, emerging from openings in the bottom.

    (Openings in bottom have grilles, to help reduce the possibility of glare)

  • Minilux HRL = approximately “Half Round with a Lip” extrusion shape [The front Lip helps reduce the possibility of glare]

  • Any length

  • No transformer or driver necessary

  • Dimmable

  • ETL Approved to meet UL Standards

SIZES

Length: almost any length—Please specify in units-of-an-inch [Note: lengths over 12 feet will require a discrete seam]

Protrusion:

  • Standard protrusions: are approximately 8-1/2” -or- approximately 12-1/2”

  • Custom protrusions: are available with an up-charge (with all mountings, except MM02)

LIGHT SOURCES

LED lamps (Close to zero UV)
6 Watts 75 Watt incandescent equivalent 900 lumens (each lamp)
Color Temperature: 2700K -or- 3000K 80+ CRI
Base: Bayonet, double-contact base, BA15d
120 Volts - Dimmable ETL Approved
Note: Lamps are usually spaced approximately 12” apart
These LED’s operate on line voltage, and NO separate driver or transformer is needed!

JD Krypton lamps (Blocks UV)
20, 40, or 60 Watts (each lamp)
Base: Bayonet, double-contact base, BA15d
120 Volts
Note: Lamps are usually spaced approximately 12” apart

JD Halogen lamps
50 or 75 Watts (each lamp)
Base: Bayonet, double-contact base, BA15d
130 Volts
Note: Lamps are usually spaced approximately 12” apart

NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.

MOUNTING METHODS

  • MM01A (hardwired, with screws visible)

  • MM01B (visible) – the most typically specified mounting

  • MM02 (on wall-mounted arm(s), plugged into outlet)
    MM03A (through a millwork fascia, hardwired)

  • MM03B (through a millwork fascia, plugged in)

  • MM04A (over or under a fixed shelf, with multiple stems)

  • MM04B (over or under a fixed shelf, with a single stem)

DRAWINGS AND FILES