PENDANTS
PT118
Double Shilo I
CEILING OR SOFFIT-MOUNTED DIFFUSED GLASS FOR AMBIENT ILLUMINATION
Cup-shaped SHILO I frosted-glass “heads” (approx. 4-3/8” diameter)
Also available with SHILO II frosted-glass head
No transformer or driver necessary
Dimmable
SIZES
Width: approximately 9-3/4”
Glass Size: each Shilo I glass cup-like “head” is approximately—
Wide: 4-1/2”
Deep (front-to-back): 4-5/8”
High: 1-3/4”
Drop (the distance FROM face-of-ceiling TO bottom-of-fixture): standard drops are approximately 5-1/2”, 8-3/4”, 12-3/4”, and 18-3/4” [Custom drops are available with an up-charge]
LIGHT SOURCES
In open top of fixture:
JCD Halogen lamp (two needed)
Base: Bi-pin, GY6.35
120 Volts
50 or 75 Watts (each lamp)
No transformer necessary
In open top of fixture:
JD Halogen lamps (two needed)
Base: Bayonet, double-contact base, BA15d
130 Volts
50 or 75 Watts (each lamp)
No transformer necessary
In open top of fixture:
JD Krypton lamps (Blocks UV) (two needed)
Base: Bayonet, double-contact base, BA15d
120 Volts
20, 40, or 60 Watts (each lamp)
No transformer necessary
In open top of fixture:
LED lamps (Close to zero UV) (one per Shilo “head”)
Base: Bayonet, double-contact base, BA15d
120 Volts - Dimmable
5 Watts (each lamp) 60 Watt incandescent equivalent
No transformer necessary
NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.
MOUNTING METHODS
MM01A (suspended on a stem, and hardwired through stem—with screws visible)
MM01B (suspended on a stem, and hardwired through stem—with No screws visible) – the most typically specified mounting
DRAWINGS AND FILES
