HOME / PRODUCTS / VANITY LIGHTS / SHILO II MICROLUX

 

VANITY LIGHTS

VL117

Shilo II Microlux

WALL OR MIRROR-MOUNTED VANITY LIGHT

  • The SHILO frosted-glass cups allow the bright light to diffuse, for perfect vanity lighting

  • SHILO frosted-glass, cup-shaped “heads”

  • Microlux—our most elegantly slender extrusion!

  • NO transformer necessary

  • Dimmable

  • ETL Approved to meet UL Standards

SIZES

Length: almost any length—Please specify in units-of-an-inch [Note: lengths over 12 feet will require a seam]

Protrusion: standard protrusion is approximately 5-1/8”

Glass Size: each Shilo II glass cup-like “head” is approximately—

  • Wide: 4-1/2”

  • Deep (front-to-back): 4-3/8”

  • High: 1-1/2”

LIGHT SOURCES

In open top of fixture:
JCD Halogen lamp (one per Shilo “head”)
Base: Bi-pin, GY6.35
120 Volts
50 or 75 Watts (each lamp)
No transformer necessary

In open top of fixture:
JD Halogen lamps (one per Shilo “head”)
Base: Bayonet, double-contact base, BA15d
130 Volts
50 or 75 Watts (each lamp)
No transformer necessary

In open top of fixture:
JD Krypton lamps (Blocks UV) (one per Shilo “head”)
Base: Bayonet, double-contact base, BA15d
120 Volts
20, 40, or 60 Watts (each lamp)
No transformer necessary

In open top of fixture:

LED lamps (Close to zero UV) (one per Shilo “head”)
Base: Bayonet, double-contact base, BA15d 
120 Volts - Dimmable 
5 Watts (each lamp) 60 Watt incandescent equivalent 
No transformer necessary

NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.

MOUNTING METHODS

  • MM06C (screws through extrusion—with screws visible)

DRAWINGS AND FILES