SL66 - Bullets Swivel

CEILING OR SOFFIT-MOUNTED DIRECTIONAL SPOT-LIGHT

• Directional Spot-Light

• Swivel allows for aiming at art or wall

• Various diameter “Bullet” shades are available:

• Small Bullet: 2-3/8” diameter x 2-7/8” long
  Medium Bullet: 2-3/8” diameter x 4-1/4” long
  Large Bullet: 3-3/8” diameter x 4-1/2” long
  [Note: size of bullet determines which bulbs can fit in the fixture—see LIGHT SOURCES for options]

• Available with Barrel swivel (allows adjustment of angle and direction) -or- Ball Swivel (allows adjustment of angle)

• Transformer only necessary when a low voltage lamp is specified

• Dimmable

SIZES

Drop (the distance FROM face-of-ceiling TO bottom-of-fixture): Drop is determined by two factors:

• a. type of Bullet (because they vary in length)

• b. length of stem (which connects the bullet to the plate)

• Total drop is finalized in the shop drawing phase.

• [Custom drops are available with an up-charge]

LIGHT SOURCES

NOTES: Not all lamps can be used for all Bullet sizes — See notes at each lamp to determine which lamps apply. The larger the bullet, the easier it is to change the lamp.

[THIS LAMP FOR USE WITH: Large and Medium Bullets]
LED lamp (one needed)
SORAA “Brilliant”’
Base: GU10
MR16
60 degree Flood
120 Volts
7.5 Watts
Color Temperature: 2700K
This LED lamp operates on line voltage, and NO separate driver or transformer is needed!

[THIS LAMP FOR USE WITH: Large and Medium Bullets]
LED lamp (one needed)
SORAA “Brilliant”’
Base: Bi-pin
MR16
60 degree Flood
120 Volts
7.5 Watts
Color Temperature: 2700K
This LED lamp operates on line voltage, and NO separate driver or transformer is needed!

[THIS LAMP FOR USE WITH: Large and Medium Bullets]
Halogen lamp (one needed)
Base: GU10
MR-16
Flood
120 Volts
50 Watts
No transformer necessary

[THIS LAMP FOR USE WITH: Large, and Medium Bullets]
Halogen lamp (one needed)
Base: Bi-pin
MR-16
Flood
120 Volts
50 Watts
No transformer necessary

[THIS LAMP FOR USE WITH: Large, Medium, and Small Bullets]
Halogen lamp (one needed)
Base: GU-10
MR-11
Flood
120 Volts
20 Watts
No transformer necessary

[THIS LAMP FOR USE WITH: Large, Medium, and Small Bullets]
Halogen lamp (one needed)
JCD
Base: Bi-pin, GY6.35
120 Volts
20, 35, 50 or 75 Watts (each lamp)
No transformer necessary

[THIS LAMP FOR USE WITH: Large, Medium, and Small Bullets]
Halogen lamp (one needed)
JD
Base: Bayonet, double-contact base, BA15d
130 Volts
50 or 75 Watts (each lamp)
No transformer necessary

[THIS LAMP FOR USE WITH: Large, Medium, and Small Bullets]
Krypton lamp (one needed)
JD
Base Bayonet, double-contact base, BA15d
120 Volts
40 or 60 Watts (each lamp)
No transformer necessary

[THIS LAMP FOR USE WITH: Large, Medium, and Small Bullets]
Halogen lamp (one needed)
Base Bayonet, Double-Contact
PH20 (Philips “Halotone” Aluminum Reflector Lamp)
12Volts
20 Watts
Transformer necessary

[THIS LAMP FOR USE WITH: Large, Medium, and Small Bullets]
Halogen lamp (one needed)
Base: Bi-pin
MR-8
Narrow Beam
12Volts
35 Watts
Transformer necessary

NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.

STANDARD FINISHES

CUSTOM FINISHES

Want a custom color? We offer powder coat finishes from TIGER Drylac in any RAL color to meet your specific requirements. Custom finishes are available for an additional charge and require an 8-10 week lead time. Contact our sales team for details.

MOUNTING METHODS

Modulightor light fixtures are renowned for their sleek designs and versatile lighting solutions, making them a popular choice for both residential and commercial environments. A key aspect of their adaptability lies in the variety of mounting methods available, which allow these fixtures to seamlessly integrate into diverse architectural settings - both new and existing.

Whether the goal is to achieve a minimalist ceiling installation, highlight architectural features with wall mounting, or incorporate lighting into custom millwork, the right mounting technique plays a crucial role in the overall success of the lighting design. The following options are available for this fixture:

Hard-Wired with a Plate

NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.

DOWNLOADS