Shilo II Orbit CH119 Chandelier
DIFFUSED GLASS CHANDELIER FOR BRIGHT AMBIENT & UPWARD ILLUMINATION
Similar to our chandelier Ch115—but with angled arms for a fun, whimsical look
Arm angles and/or lengths can vary—and be adjusted on-site
Choose 3, 5 or 6 arms, for a unique custom look
Use more spokes for more light
Three diameter options:
Small: approx. 31” diameter
Medium: approx. 31” diameter
Large: approx. 42” diameter
Cup-shaped SHILO II frosted-glass “heads” (approx. 4-1/2” diameter)
Also available with SHILO I frosted-glass heads
No transformer or driver necessary
Dimmable
SIZES
Diameter: imagining that the spokes (with their “heads”) fit within a circle, there are several approximate diameter options—
Small: approx. 20” diameter
Medium: approx. 26” diameter
Large: approx. 34” diameter
BUT:
If the arms (the spokes) are angled (as is intended with this design), then the diameter would decrease—and the final diameter would depend on the angles chosen (which can be adjusted on-site).
Glass Size: each Shilo II glass cup-like “head” is approximately—
Wide: 4-1/2”
Deep (front-to-back): 4-3/8”
High: 1-1/2”
Drop (the distance FROM face-of-ceiling TO bottom-of-fixture): If the spokes are set horizontally, then standard drops are approximately 8-1/4”, 12-1/4”’, and 18-1/4” [Custom drops are available with an up-charge]
BUT:
If the arms (the spokes) are angled (as is intended with this design), then the drop would increase—and that would depend on the angles chosen (which can be adjusted on-site).
LIGHT SOURCES
In open top of fixture:
JCD Halogen lamp (one needed per Shilo “head”)
Base: Bi-pin, GY6.35
120 Volts
35, 50 or 75 Watts (each lamp)
No transformer necessary
In open top of fixture:
JD Halogen lamps (one needed per Shilo “head”)
Base: Bayonet, double-contact base, BA15d
130 Volts
50 or 75 Watts (each lamp)
No transformer necessary
In open top of fixture:
JD Krypton lamps (Blocks UV) (one needed per Shilo “head”)
Base: Bayonet, double-contact base, BA15d
120 Volts
20, 40, or 60 Watts (each lamp)
No transformer necessary
In open top of fixture:
LED lamps (Close to zero UV) (one per Shilo “head”)
Base: Bayonet, double-contact base, BA15d
120 Volts - Dimmable
6 Watts (each lamp) 75 Watt incandescent equivalent
No transformer necessary
NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.
MOUNTING METHODS
MM01A (suspended by stems, and hardwired through a stem—with screws visible)
MM01B (suspended by stems, and hardwired through a stem—with No screws visible) – the most typically specified mounting
DRAWINGS AND FILES
