HOME / PRODUCTS / ART LIGHTS / PIPETTE - DOUBLE PIPETTE AL92

ART LIGHTS

AL92

Double Pipette

WALL MOUNTED

Each fixture has two PIPETTE bulb enclosures: each can be rotated, so the angle of light is adjustable

Not for use over mirrors — Instead, see our Vanity Light VL11

Overall width: 11-1/8”

No transformer or driver necessary

Dimmable

ETL Approved to meet UL Standards

NOTE: This is a special purpose light fixture, which requires it being installed above the reach of individuals. The fixture is sold subject to it being installed at a height which maintains that condition, and it is the owner's responsibility to verify and maintain that condition.

SIZE

Overall Width: 11-1/8"”

Protrusion:

Standard protrusions are 6”, 10” and 16” stems.

Custom protrusions: are available with an up-charge (with all mountings, except MM02)


LIGHT SOURCES

JCD Halogen lamp
Base: Bi-pin, GY6.35
120 Volts
20, 35 or 50 Watts (each lamp)
No transformer necessary

LED lamps (Close to zero UV)

  • 6 Watts 75 Watt incandescent equivalent 900 lumens (each lamp)

  • Color Temperature: 2700K -or- 3000K 80+ CRI

  • Base: Bayonet, double-contact base, BA15d

  • 120 Volts - Dimmable ETL Approved

  • Note: Lamps are usually spaced approximately 12” apart

  • These LED’s operate on line voltage, and NO separate driver or transformer is needed!

JD Krypton lamps (Blocks UV)

  • 20, 40, or 60 Watts (each lamp)

  • Base: Bayonet, double-contact base, BA15d

  • 120 Volts

  • Note: Lamps are usually spaced approximately 12” apart

JD Halogen lamps

  • 50 or 75 Watts (each lamp)

  • Base: Bayonet, double-contact base, BA15d

  • 130 Volts

  • Note: Lamps are usually spaced approximately 12” apar

NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.


MOUNTING METHODS

MM01A (hardwired, with screws visible)

MM01B (hardwired, with No screws visible) – the most typically specified mounting

MM02 (on wall-mounted arm(s), plugged into outlet)

MM03A (through a millwork fascia, hardwired)

MM03B (through a millwork fascia, plugged in)

MM04A (over or under a fixed shelf, with multiple stems)

MM04B (over or under a fixed shelf, with a single stem)


DRAWINGS AND FILES