PT71 - Guten Bullet

CEILING OR SOFFIT-MOUNTED DIRECTIONAL SPOT-LIGHT

  • [The light is directed straight down (and there is No angular adjustment)—But if you’d like a similar fixture with swivels for angular adjustment, see our Spot

  • Luminaries SL72 and SL73]

  • Also available without Guten bullet (lamp is mainly exposed, allowing the lamp to be part of the fixture design)

  • No transformer or driver necessary

  • Dimmable

SIZES

Width: bullet is approximately 2-3/4” diameter [The width of the plate will depend on the plate that is specified.]

Drop (the distance FROM face-of-wall TO bottom-of-fixture): standard drops are approximately 5-3/4”, 9-3/4”, 13-3/4” and 19-3/4” [Custom drops are available with an up-charge]

LIGHT SOURCES - All Line Voltage (No Transformer or Driver needed)

LED lamp SORAA “Brilliant” (one needed)
Base: GU-10 MR16 60 degree Flood
120 Volts • 7.5 Watts
Color Temperature: 2700K

LED lamp SORAA “Brilliant” (one needed)
Base: Bi-pin MR16 60 degree Flood
120 Volts • 7.5 Watts
Color Temperature: 2700K

Halogen lamp (one needed)
Base: GU10 MR-16 Flood
120 Volts • 50 Watts

Halogen lamp (one needed)
Base: Bi-pin socket MR-16 Flood
120 Volts • 50 Watts

Halogen lamp (one needed)
Base: GU-10 MR-11 Flood
120 Volts • 20 Watts

JCD Halogen lamps two needed In open top of fixture
Base: Bi-pin, GY6.35
120 Volts • 50 or 75 Watts (each lamp)

NOTE: Fixtures ship with lamps or LED boards in place. It is specifier’s responsibility to verify that selection is compatible with the wiring, power, and controls on-site.

AVAILABLE FINISHES

CUSTOM FINISHES

For large quantities TIGER Drylac custom powder coat finishes in any RAL color are available for an additional charge and longer lead time. Contact our sales team for details.

MOUNTING METHODS

Modulightor light fixtures are renowned for their sleek designs and versatile lighting solutions, making them a popular choice for both residential and commercial environments. A key aspect of their adaptability lies in the variety of mounting methods available, which allow these fixtures to seamlessly integrate into diverse architectural settings - both new and existing.

Whether the goal is to achieve a minimalist ceiling installation, highlight architectural features with wall mounting, or incorporate lighting into custom millwork, the right mounting technique plays a crucial role in the overall success of the lighting design. The following options are available for this fixture:

Hard-Wired with a Plate

MM01A (screws visible)

MM01B (no screws visible) – the most specified mounting

NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.

DOWNLOADS