PT65 - Bullet 2 (Medium)

CEILING OR SOFFIT-MOUNTED DIRECTIONAL SPOT-LIGHT

  • [No angular adjustment—But if you’d like a similar fixture with swivels for angular adjustment, see our Spot Luminaries SL66 and SL67]

  • Various diameter “Bullet” shades are available:

  • Small Bullet: 2-3/8” diameter x 2-7/8” long

  • Medium Bullet: 2-3/8” diameter x 4-1/4” long

  • Large Bullet: 3-3/8” diameter x 4-1/2” long

  • [Note: size of bullet determines which bulbs can fit in the fixture—see LIGHT SOURCES for options]

  • No transformer needed for most lamps

  • Dimmable

SIZES

Drop (the distance FROM face-of-ceiling TO bottom-of-fixture): Drop is determined by two factors:

  1. type of Bullet that is selected (because they vary in length)

  2. length of the stem (which connects the bullet to the plate)

This is finalized in the shop drawing phase.

[Custom drops are available with an up-charge]

LIGHT SOURCES - All Line Voltage (No Transformer or Driver needed)

NOTES: Not all lamps can be used for all Bullet sizes — See notes at each lamp to determine which lamps apply.
The larger the bullet, the easier it is to change the lamp.

-For use with Large and Medium Bullets -

LED lamp SORAA “Brilliant” (one needed)
120 Volts • 7.5 Watts
Color Temperature: 2700K
Base: GU10 MR16
60 degree Flood

LED lamp SORAA “Brilliant” (one needed)
120 Volts • 7.5 Watts
Color Temperature: 2700K
Base: Bi-pin MR16
60 degree Flood

Halogen lamp (one needed)
120 Volts • 50 Watts
Base: GU10 MR-16
Flood

Halogen lamp (one needed)
120 Volts • 50 Watts
Base: Bi-pin MR-16
Flood

- For use with Large, Medium, and Small Bullets. -

Halogen lamp (one needed)
Base: GU-10 MR-11
Flood
120 Volts • 20 Watts

JCD Halogen lamp (one needed)
120 Volts • 20, 35, 50 or 75 Watts (each lamp)
Base: Bi-pin, GY6.35

JD Halogen lamp (one needed)
130 Volts • 50 or 75 Watts (each lamp)
Base: Bayonet, double-contact base, BA15d

JD Krypton lamp (one needed)
120 Volts • 40 or 60 Watts (each lamp)
Bayonet, double-contact base, BA15d

Halogen lamp (one needed)
12Volts • 20 WattsBase: Bayonet, Double-Contact
Base: Bayonet, Double-Contact
PH20 (Philips “Halotone” Aluminum Reflector Lamp)
*Transformer necessary


Halogen lamp (one needed)
12Volts • 35 Watts
Base: Bi-pin MR-8
Narrow Beam
*Transformer necessary

NOTE: Fixtures ship with lamps in place. It is specifier’s responsibility to verify that selection is compatible with the wiring, power, and controls on-site.

AVAILABLE FINISHES

CUSTOM FINISHES

For large quantities TIGER Drylac custom powder coat finishes in any RAL color are available for an additional charge and longer lead time. Contact our sales team for details.

MOUNTING METHODS

Modulightor light fixtures are renowned for their sleek designs and versatile lighting solutions, making them a popular choice for both residential and commercial environments. A key aspect of their adaptability lies in the variety of mounting methods available, which allow these fixtures to seamlessly integrate into diverse architectural settings - both new and existing.

Whether the goal is to achieve a minimalist ceiling installation, highlight architectural features with wall mounting, or incorporate lighting into custom millwork, the right mounting technique plays a crucial role in the overall success of the lighting design. The following options are available for this fixture:

Hard-Wired with a Plate

MM01A (screws visible)

MM01B (no screws visible) – the most specified mounting

NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.

DOWNLOADS