TB107 - Lucci Double

DIFFUSABLE PORTABLE ACCENT LIGHT

  • Can also be mounted through a work surface

  • No transformer or driver necessary

SIZES

Lucci Glass: the glass cone, itself, is approximately 2-5/8” diameter x 2-5/8” high

Width: approximately 14-1/4”

  • Height:

  • Base Mounted: Approximately 12-5/8” when on a stone base. Metal bases are a bit thinner than stone bases, so the fixture’s overall height will be a bit shorter.
    [Note: custom heights are available with an upcharge]

  • Deck Mounted: To be determined, by designer, for each project.

LIGHT SOURCES

JCD Halogen lamps [two needed]
Base: Bi-pin, GY6.35
120 Volts
20, 35, or 50 Watts (each lamp)
No transformer necessary

LED lamp [by Hero] (two needed)
Base: Bi-pin, GY6.35
Color temperature: Approx. 2700K
3.5 Watts (each lamp)
120 Volts
No transformer necessary
Dimmable: See Hero’s “dimmer compatibility list”

Other LED lamps may be available — Check with us for availability.

NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.

STANDARD FINISHES

CUSTOM FINISHES

Want a custom color? We offer powder coat finishes from TIGER Drylac in any RAL color to meet your specific requirements. Custom finishes are available for an additional charge and require an 8-10 week lead time. Contact our sales team for details.

MOUNTING METHODS

Modulightor's light fixtures are renowned for their sleek designs and versatile lighting solutions, making them a popular choice for both residential and commercial environments. A key aspect of their adaptability lies in the variety of mounting methods available, which allow these fixtures to seamlessly integrate into diverse architectural settings - both new and existing.

Whether the goal is to achieve a minimalist ceiling installation, highlight architectural features with wall mounting, or incorporate lighting into custom millwork, the right mounting technique plays a crucial role in the overall success of the lighting design. The following options are available for this fixture:

MOVEABLE BASE

MM09 (Fixture sits on its own movable base, with a cord & plug)

DECK MOUNTED AND HARD WIRED

MM03A Fixture is supported on deck-mounted metal stem(s), and hard-wired to power and switching

NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.

DOWNLOADS