Lucci Spoke CH106 Chandelier

DESIGNED BY PAUL RUDOLPH

  • A fixture with presence—but also has a feeling of lightness (and also gives a lot of usable light)

  • Each Arm has bulbs at both ends

  • Also available as a table-top model

  • Typically 38” wide

  • Minimum drop is approximately 20”—but the fixture can hang lower, and longer drops (of almost any length) are possible

  • Transformer is necessary

  • Dimmable

SIZES

Width: approximately 37”

Drop (the approximate distance FROM face-of-ceiling TO bottom-of-fixture): minimum drop is approximately 22-1/2”. Longer drops are available: please specify in increments-of-an-inch.

LIGHT SOURCES - All Line Voltage No Transformer necessary

JCD Halogen lamps
120 Volts • 20, 35, 50 Watts (each lamp)
Base: Bi-pin, GY6.35

LED lamp [by Hero]
120 Volts • 3.5 Watts (each lamp)
Color temperature: Approx. 2700K
Base: Bi-pin, GY6.35
Dimmable with Lutron Casetta, Lutron Diva, Lutron Maestro ELD

Other LED lamps may be available — Check with us for availability.

NOTE: Fixtures ship with lamps in place. It is specifier’s responsibility to verify that selection is compatible with the wiring, power, and controls on-site.

AVAILABLE FINISHES

CUSTOM FINISHES

For large quantities TIGER Drylac custom powder coat finishes in any RAL color are available for an additional charge and longer lead time. Contact our sales team for details

MOUNTING METHODS

Modulightor light fixtures are renowned for their sleek designs and versatile lighting solutions, making them a popular choice for both residential and commercial environments. A key aspect of their adaptability lies in the variety of mounting methods available, which allow these fixtures to seamlessly integrate into diverse architectural settings - both new and existing.

Whether the goal is to achieve a minimalist ceiling installation, highlight architectural features with wall mounting, or incorporate lighting into custom millwork, the right mounting technique plays a crucial role in the overall success of the lighting design. The following options are available for this fixture:

Hard-Wired with a Plate

  • MM01C (suspended by rods, and hardwired at ceiling behind a 6-1/2” round-domed plate, with a "Modern Cap" screw visible at center of the plate)

DOWNLOADS