HOME / PRODUCTS / CHANDELIERS / Coupola Multi-Spoke CH96

 

Coupola Multi-Spoke CH96 Chandelier

DESIGNED BY PAUL RUDOLPH

  • A fixture with presence—but also has a feeling of lightness (and also gives a lot of usable light)

  • Each Arm has bulbs at both ends

  • Also available as a table-top model

  • Typically 38” wide

  • Minimum drop is approximately 20”—but the fixture can hang lower, and longer drops (of almost any length) are possible

  • Transformer is necessary

  • Dimmable

SIZES

Width: approximately 37”

Drop (the approximate distance FROM face-of-ceiling TO bottom-of-fixture): minimum drop is approximately 22-1/2”. Longer drops are available: please specify in increments-of-an-inch.

LIGHT SOURCES

JC Xenon lamps (44 lamps needed)
Base: Bi-Pin, G4
12 Volts
5 or 10 watts (each lamp)
Fixture wattage: if using 5 watt lamps x 44 = 220 watts (total)
Fixture wattage: if using 10 watt lamps x 44 = 440 watts (total)
120 Volts
Transformer necessary—a transformer is usually supplied with fixture, but is subject to availability.

NOTE: Fixtures are provided with a set of lamps, as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.

STANDARD FINISHES

CUSTOM FINISHES

Want a custom color? We offer powder coat finishes from TIGER Drylac in any RAL color to meet your specific requirements. Custom finishes are available for an additional charge and require an 8-10 week lead time. Contact our sales team for details.

MOUNTING METHODS

Modulightor light fixtures are renowned for their sleek designs and versatile lighting solutions, making them a popular choice for both residential and commercial environments. A key aspect of their adaptability lies in the variety of mounting methods available, which allow these fixtures to seamlessly integrate into diverse architectural settings - both new and existing.

Whether the goal is to achieve a minimalist ceiling installation, highlight architectural features with wall mounting, or incorporate lighting into custom millwork, the right mounting technique plays a crucial role in the overall success of the lighting design. The following options are available for this fixture:

Hard-Wired with a Plate

  • MM01C (suspended by rods, and hardwired at ceiling behind a 6-1/2” round-domed plate, with a "Modern Cap" screw visible at center of the plate)

DOWNLOADS