HOME / PRODUCTS / VANITY LIGHTS / VL108 - LUCCI MICROLUX

PREVIOUS PRODUCT / NEXT PRODUCT

 

VL108 - Lucci Microlux

DETAILS

  • Wall or Mirror Mounted Vanity Light

  • Microlux slender extrusion

  • Also available in our Minilux SQ = approximately “SQuare” extrusion shape

  • Any Length

  • No transformer or driver necessary

  • Dimmable

  • ETL Approved to meet UL Standards

DIMENSIONS

Length:

  • Any length [fixture must be 12” long minimum]

  • Please specify in units-of-an-inch [lengths over 12 feet will require a discreet seam]

Projection:

  • Standard: 6” and 10” stems (overall projection is about 2” greater)

  • Custom stems are available with an up-charge (with all mountings, except MM02)

Glass Shade:

  • The glass cone is approximately 2-5/8” diameter x 2-5/8” high

LIGHT SOURCES - All Line Voltage No Transformer necessary

JCD Halogen lamps
120 Volts • 20, 35, 50 Watts (each lamp)
Base: Bi-pin, GY6.35

LED lamp [by Hero]
120 Volts • 3.5 Watts (each lamp)
Color temperature: Approx. 2700K
Base: Bi-pin, GY6.35
Dimmable with Lutron Casetta, Lutron Diva, Lutron Maestro ELD

Other LED lamps may be available — Check with us for availability.

NOTE: Fixtures ship with lamps in place. It is specifier’s responsibility to verify that selection is compatible with the wiring, power, and controls on-site.

AVAILABLE FINISHES

CUSTOM FINISHES

For large quantities TIGER Drylac custom powder coat finishes in any RAL color are available for an additional charge and longer lead time. Contact our sales team for details

MOUNTING METHODS

Modulightor light fixtures are renowned for their sleek designs and versatile lighting solutions, making them a popular choice for both residential and commercial environments. A key aspect of their adaptability lies in the variety of mounting methods available, which allow these fixtures to seamlessly integrate into diverse architectural settings - both new and existing.

Whether the goal is to achieve a minimalist ceiling installation, highlight architectural features with wall mounting, or incorporate lighting into custom millwork, the right mounting technique plays a crucial role in the overall success of the lighting design. The following options are available for this fixture:

Hard-Wired with Screws Through Extrusion

MM06C (screws through extrusion—with screws visible)

 

NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.