VL124 - Wagram Luxline

DETAILS

  • Wall or Mirror Mounted Vanity Light

  • WAGRAM frosted glass cones allow the bright light to diffuse, for perfect vanity lighting

  • Cone-shaped WAGRAM frosted-glass “head” (approx. 5” diameter)

  • Luxline = “Modernist Rectangle” extrusion shape

  • Also available with Minilux SQ = approximately “SQuare” extrusion shape

  • Any Length

  • No transformer necessary

  • Dimmable

  • ETL Approved to meet UL Standards

DIMENSIONS

Length:

  • Any length [fixture must be 12” long minimum]

  • Please specify in units-of-an-inch [lengths over 12 feet will require a discreet seam]

Projection:

  • Standard: 7-3/4” and 9-3/4”

  • Custom stems are available with an up-charge (with all mountings, except MM02)

Glass Shade:

  • The glass cone is approximately 5-1/8” diameter x 3-7/8” high

LIGHT SOURCES

JCD Halogen lamps

  • Base: Bi-pin, GY6.35

  • 120 Volts

  • 20, 35, 50 or 75 Watts (each lamp)

  • No transformer necessary

LED lamps may be available — Check with us for availability

LED lamp (by Hero)

  • Base: Bi-pin, GY6.35

  • Color temperature: Approx. 2700K

  • 3.5 Watts (each lamp)

  • 120 Volts

  • No transformer necessary

  • Dimmable: See Hero’s “dimmer compatibility list”

NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.

STANDARD FINISHES

CUSTOM FINISHES

Want a custom color? We offer powder coat finishes from TIGER Drylac in any RAL color to meet your specific requirements. Custom finishes are available for an additional charge and require an 8-10 week lead time. Contact our sales team for details.

MOUNTING METHODS

Modulightor light fixtures are renowned for their sleek designs and versatile lighting solutions, making them a popular choice for both residential and commercial environments. A key aspect of their adaptability lies in the variety of mounting methods available, which allow these fixtures to seamlessly integrate into diverse architectural settings - both new and existing.

Whether the goal is to achieve a minimalist ceiling installation, highlight architectural features with wall mounting, or incorporate lighting into custom millwork, the right mounting technique plays a crucial role in the overall success of the lighting design. The following options are available for this fixture:

Hard-Wired with Screws Through Extrusion

MM06C (screws through extrusion - with screws visible)

 

NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.

DRAWINGS AND FILES