CUPOLA
SC95
Coupola HR
SCONCE UPLIGHT
Wall or cabinetry mounted
Elegantly shallow “domelike” bowl sends light upward
Arm is Minilux HR = our approximately “Half Round” extrusion shape
120 Volt, Line Voltage
Dimmable
ETL Approved to meet UL Standards
SIZES
Protrusion: approx. 8” is typical – but you can also specify a longer protrusion (up to approx. 12")
Width: approximately 6-1/2”
Height: approx. 2-3/8” (the height of protruding component); but the height of the plate (at the wall) will depend on the shape and orientation of the plate that is chosen
LIGHT SOURCES
J Halogen
Base: T3, Double-ended
120 Volts
150 Watts (each lamp)
No transformer necessary
LED lamps may be available — Check with us for availability.
NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.
MOUNTING METHODS
MM01A (screws visible)
DRAWINGS AND FILES
