HOME / PRODUCTS / ART LIGHTS / AL92 - DOUBLE PIPETTE

AL92 - Double Pipette


WALL MOUNTED

  • The fixture has two pipette bulb enclosures: each can be rotated, so the angle of light is adjustable

  • Not for use over mirrors — Instead, see our Vanity Light VL11

  • Overall width: 11-1/8”

  • No transformer or driver is necessary

  • Dimmable

  • ETL Approved to meet UL Standards

NOTE: This is a special purpose light fixture, which requires it being installed above the reach of individuals. The fixture is sold subject to it being installed at a height which maintains that condition, and it is the owner's responsibility to verify and maintain that condition.


SIZE

Overall Width: 11-1/8"

Protrusion:

  • Standard protrusions are 6”, 10” and 16” stems

  • Custom protrusions are available with an up-charge (for all mountings except MM02)


LIGHT SOURCES

JCD Halogen lamp

  • Base: Bi-pin, GY6.35

  • 120 Volts

  • 20, 35 or 50 Watts (each lamp)

  • No transformer necessary

LED lamps (Close to zero UV)

  • 6 Watts 75 Watt incandescent equivalent 900 lumens (each lamp)

  • Color Temperature: 2700K -or- 3000K 80+ CRI

  • Base: Bayonet, double-contact base, BA15d

  • 120 Volts - Dimmable ETL Approved

  • Note: Lamps are usually spaced approximately 12” apart

  • These LEDs operate on line voltage and NO separate driver or transformer is needed!

JD Krypton lamps (Blocks UV)

  • 20, 40, or 60 Watts (each lamp)

  • Base: Bayonet, double-contact base, BA15d

  • 120 Volts

  • Note: Lamps are usually spaced approximately 12” apart

JD Halogen lamps

  • 50 or 75 Watts (each lamp)

  • Base: Bayonet, double-contact base, BA15d

  • 130 Volts

  • Note: Lamps are usually spaced approximately 12” apart

NOTE: Fixtures are provided with a set of lamps (or - if specified or integral to the fixture’s design - with LEDs) as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.


MOUNTING METHODS

  • MM01A (hardwired, with screws visible)

  • MM01B (hardwired, with no screws visible) – the most typically specified mounting

  • MM02 (on wall-mounted arm(s), plugged into outlet)

  • MM03A (through a millwork fascia, hardwired)

  • MM03B (through a millwork fascia, plugged in)

  • MM04A (over or under a fixed shelf, with multiple stems)

  • MM04B (over or under a fixed shelf, with a single stem)

STANDARD FINISHES

CUSTOM FINISHES

Want a custom color? We offer powder coat finishes from TIGER Drylac in any RAL color to meet your specific requirements. Custom finishes are available for an additional charge and require an 8-10 week lead time. Contact our sales team for details.

DRAWINGS AND FILES