Images: Left: Julien Aleksandres | Right: Jamie Drake

CH199 - Vector Matrix

INSPIRED BY PAUL RUDOLPH - DESIGNED BY JULIEN ALEKSANDRES

  • Minilux SQ—approximately “SQuare” extrusion shape

  • Dimensions & proportions are 100% customized for the space: this fixture can be almost any length & width

  • Also available as an “Up Down" with openings for lamps, or with some elements Up light only and other elements Down light only.

  • Line Voltage - No transformer or driver necessary

  • Dimmable

  • ETL Approved to meet UL Standards

SIZES

Length & Width: can be of almost any size—please specify in units-of-an-inch (minimum length of a segment is 18”)
Note: lengths over 12 feet will require a seam

Drop:

  • Standard Drops: are approximately 12” or- approximately 18”

  • Custom Drops: are available with an up-charge

LIGHT SOURCES - All Line Voltage (No Transformer or Driver needed)

LED boards (Close to zero UV)

  • 120 Volt • 14 Watts • 1200 Lumens (per foot with a diffused optic)

  • Color Temperature: 2700K -or- 3000K 95 CRI

  • Dimmable, ETL Approved to meet UL Standards

LED lamps (Close to zero UV) Spaced 12” apart typically

  • 120 Volt • 6 Watts (75 Watt incandescent equivalent) • 900 lumens (each lamp)

  • Color Temperature: 2700K -or- 3000K • 80+ CRI

  • Base: Bayonet, double-contact base, BA15d

  • Dimmable, ETL Approved to meet UL Standards

Incandescent JD Krypton lamps (Block UV) Spaced 12” apart typically

  • 120 Volt • 20, 40, or 60 Watts (each lamp)

  • Base: Bayonet, double-contact base, BA15d

Incandescent JD Halogen lamps Spaced 12” apart typically

  • 130 Volt • 50 Watts (each lamp)

  • Base: Bayonet, double-contact base, BA15d

NOTE: Fixtures ship with lamps or LED boards in place. It is specifier’s responsibility to verify that selection is compatible with the wiring, power, and controls on-site.

AVAILABLE FINISHES

CUSTOM FINISHES

For large quantities TIGER Drylac custom powder coat finishes in any RAL color are available for an additional charge and longer lead time. Contact our sales team for details.

MOUNTING METHODS

Modulightor light fixtures are renowned for their sleek designs and versatile lighting solutions, making them a popular choice for both residential and commercial environments. A key aspect of their adaptability lies in the variety of mounting methods available, which allow these fixtures to seamlessly integrate into diverse architectural settings - both new and existing.

Whether the goal is to achieve a minimalist ceiling installation, highlight architectural features with wall mounting, or incorporate lighting into custom millwork, the right mounting technique plays a crucial role in the overall success of the lighting design. The following options are available for this fixture:

Hard-Wired with a Plate

MM01A (screws visible)

MM01B (no screws visible) – the most specified mounting

Suspended and Hardwired

MM08A (suspended by slender cables, and hardwired through a power cable)

MM08B (suspended by slender cables, and hardwired through a stem)

MM08C (suspended by stems, and hardwired through a power cable)

 

NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.

DOWNLOADS