SC04 - Luxline
DETAILS
High-output, Wall or Cabinetry Mounted Sconce Uplight
Luxline = Modernist Rectangle
Lamp faces upwards and is unshielded
Dimmable
ETL Approved to meet UL Standards
DIMENTIONS
Width: the head of the fixture is approx. 8” wide
Protrusion: standard protrusions are approx. 6-1/2” -or- 10-1/2” -or- 14-1/2” [Note: you can also specify a custom protrusion, with an upcharge (not to exceed 14-1/2”)]
LIGHT SOURCES - All Line Voltage No Transformer necessary
J Halogen lamp
Base: T3, Double-ended
120 Volts • 100 Watts
NOTE: Fixtures are provided with a set of lamps (or, if specified or integral to the fixture’s design, with LED’s), as specified by the customer. It is the customer’s responsibility to verify that their selection is compatible with their wiring, power, switching, and dimming system.
STANDARD FINISHES
CUSTOM FINISHES
For large quantities TIGER Drylac custom powder coat finishes in any RAL color are available for an additional charge and longer lead time. Contact our sales team for details.
MOUNTING METHODS
Modulightor light fixtures are renowned for their sleek designs and versatile lighting solutions, making them a popular choice for both residential and commercial environments. A key aspect of their adaptability lies in the variety of mounting methods available, which allow these fixtures to seamlessly integrate into diverse architectural settings - both new and existing.
Whether the goal is to achieve a minimalist ceiling installation, highlight architectural features with wall mounting, or incorporate lighting into custom millwork, the right mounting technique plays a crucial role in the overall success of the lighting design. The following options are available for this fixture:
Hard-Wired with a Plate
MM01A (screws visible)
MM01B (no screws visible) – the most specified mounting
Plugged into an Outlet
MM02 (wall-mounted arm or arms)
Through a new or existing Millwork Fascia
MM03A (hardwired)
MM03B (plugged in)
Over or Under an Existing Shelf
MM04B (single stem)
NOTE: Fixtures will be provided for installation with normal mounting conditions. It is the customer’s responsibility to verify that they have selected a fixture and mounting method which complies with local codes (L.A.H.J.) and that they are installing the fixture in an approved manner.
DOWNLOADS
